ISAAT 2005

The Eighth International Symposium on Advances in Abrasive Technology

20-24 May 2005, St. Petersburg, Russia

http://nano.mech.kitami-it.ac.jp/isaat/index.html
 

List of Accepted Papers for Publication

I. Advanced Grinding Technologies

Development of New Device for Form-Grinding and Research on the Profile-Accuracy
Q.S. Yan, L.Y. Kong, N.Q. Wu, S.B. Chen, Z.Q. Zhang and Z.D. Zheng

Adaptive Table-Motion Control of a Surface Grinding Machine Using an AE Sensor
A. Yui, S. Okuyama and T. Kitajima

An Adaptive Control of Machine Table Reciprocation Using a Hydrophone - A Method for Improving the System Efficiency and Reliability
S. Okuyama, M. Hayashi, A. Yui and T. Kitajima

Abrasive Technology of Single-Crystal Diamond by Diamond Abrasive Wheel
Y. Ma and Z.F. Lou

Effects of TiH₂ on the Properties of Fe-Based Diamond Composites
Q.L. Dai and X.P. Xu

Effect of Ultrasonic Elliptic Vibration on Friction between Shoe and Workpiece in Ultrasonic Elliptic-Vibration Shoe Centerless Grinding
Y. Wu, Y. Fan, T. Tachibana and M. Kato

Eco- and Energy-Efficient Grinding Processes
B. Denkena, M. Reichstein, N. Kramer, J. Jacobsen and M. Jung

Study on Ultrasonic Vibration Grinding Character of Nano ZrO₂ Ceramics
B. Zhao, X.H. Zhang, C.S. Liu, F. Jiao and X.S. Zhu

New Compensation Grinding of Axisymmetrical Aspherical Lenses with High NA Value
N. Yoshihara and T. Kuriyagawa

A New Diamond Wheel Containing Boron Doped Diamond Abrasives Enabling Electrically Conductive Cutting Edge and High Thermal Stability
K. Suzuki, M. Iwai, S. Ninomiya, K. Takeuchi, K. Tanaka, Y. Tanaka and T. Uematsu

Attempt of Electrodischarge Grinding with an Electrically Conductive Diamond-Cutting-Edge Wheel
K. Suzuki, S. Ninomiya, M. Iwai, Y. Tanaka, Y. Murakami, S. Sano, K. Tanaka and T. Uematsu

Ultra-High Speed Grinding Using  a CBN Wheel for a Mirror-Like Surface Finish
M. Ota, T. Nakayama, K. Takashima and H. Watanabe

Ultraprecision Fabrication of Large-Scale SiC Spherical Mirror Using ELID Grinding Process
Y. Dai, H. Ohmori, W. Lin, H. Eto and N. Ebizuka
 

II. Grinding Performance and its Mechanism

Studies on CCD On-Line Measurement System for Grinding Wheel Wear
Y.H. Zhang, H.Q. Tang and D.J. Hu

Wear of Metal-Bonded Diamond Tools in Different Abrasive Processes
X.P. Xu, Q.L. Han and Y. Li

Signal Analysis of Acoustic Emission for Laser Imitating Grinding Burn
X. Chen, Q. Liu and N. Gindy

Analysis of Grinding Temperature Considering Surface Generation Mechanism
T. Obikawa and J. Shinozuka

Noise and Vibration of Diamond Sawblade for Concrete Dry Cutting
C.Y. Wang, Y.N. Hu, Z.W. Wang and H.N. Ding

Force Characteristics in Ultrasonic Vibration Grinding of Nanoceramics
Y. Wu, B. Zhao and X.S. Zhu

Experimental Research on ELID Grinding and Cutting Performance of Nano Cemented Carbide Cutters
F.H. Zhang, J.C. Gui, Y.Z. Liu and H.L. Zhang

ELID Grinding Properties of High-Strength Reaction-Sintered SiC
Y. Dai, H. Ohmori, W. Lin, H. Eto, N. Ebizuka and K. Tsuno

Characterization of ELID-Ground Granite Surfaces
J.Y. Shen, W. Lin, H. Ohmori and X.P. Xu

Surface Quality Improvement of Aspherical Pressing Mould Using Parallel Grinding Method
F.H. Zhang, L.J. Li and S. Dong

Effect of Cutting  Edge Truncation on Ground Surface Morphology of Hard and Brittle Materials for Optical Devices
X. Kang, J. Tamaki, A. Kubo, J. Yan and T. Iyama

Kinematic Analysis of Face Grinding Process at Lapping Machines
L.X. Cao, H.J. Wu and J. Liu

Reliability Prediction of Centerless Grinding Machine
S.W. Lee, H.-Z. Choi, S.H. Nam and Y.J. Choi

A Comprehensive Evaluation Model for Assessments of Grinding Machining Quality
H.-Z. Huang, Y.-H. Li and L.-H. Xue

Analysis of the Grinding Mechanism with Wheel Head Oscillating Type CNC Crankshaft Pin Grinder
T. Fujiwara, S. Tsukamoto and M. Miyagawa
 

III. Dressing and Truing of Grinding Wheels

Investigation on the Dressing Shape of Vacuum Chuck in Wafer Rotation Grinding
H. Gao, Y.B. Tian, Z.Y. Jia and R.K. Kang

Energy-Mode Adjustment in Laser Processing a Small Vitrified CBN Grinding Wheel
X.Y. Wang, Y.B. Wu, R.K. Kang, J. Wang, W.J. Xu and M. Kato

Effects of Ultrasonic Vibration in Truing and Dressing of CBN Grinding Wheel Used for Internal Grinding of Small Holes
M. Nomura, Y. Wu, M. Kato and T. Kuriyagawa

A Study on the Optimum Condition Selection of Rotary Dressing System of Ultra-Precision Centerless Grinding Machine for Ferrule
E.-S. Lee, Y.-J. Chun and N.-K. Kim

Dressing Monitoring by Acoustic Emission
B. Denkena, J. Jacobsen and N. Kramer

Dressing of Vitreous Bonded Wheels for Continuous Generating Grinding of Gears
B. Denkena, M. Reichstein and F. Catoni

Development on Micro Precision Truing Method of ELID-Grinding Wheel (1st Report: Principle & Fundamental Experiments)
H. Ohmori, S. Yin, W. Lin, Y. Uehara, S. Morita, M. Asami and M. Ohmori

Development on Micro Precision Truing Method of ELID-Grinding Wheel (2nd Report: Application to Edge Sharpening of Large Wheel)
S. Yin, W. Lin, Y. Uehara, S. Morita, H. Ohmori, M. Asami and M. Ohmori
 

IV. Coolant and Cooling in Grinding

Study on Lubricating and Cooling Effects of Several Cooling Systems Used in Face Grinding
T. Tanaka and T. Kobayashi

A New Coolant Supply Method Using a Coolant Flow Guided Flexible Sheet Attracted to a Wheel Surface
K. Suzuki, S. Ninomiya, M. Iwai, Y. Shishido and T. Uematsu

Effects of Actively Cooled Coolant for Grinding Brittle Materials
Y. Gao, H. Lai and S. Tse

Soap Mist Jet Cooling of Grinding Processes
D.M. Babic, A.A. Torrance and D.B. Murray

Trends in Fluid Application Strategy for Grinding Processes
D.J. Stephenson
 

V. Deburring and Finishing

Analysis of Burr Formation Mechanism in Turning Aluminium Alloy Al6061-T6
A. Toropov, S.-L. Ko and B.-K. Kim

Effective Deburring of Micro Burr Using Magnetic Abrasive Finishing Method
J.I. Park, S.-L. Ko, Y.H. Hanh and Y.M. Baron

Improvement of Surface Texture of Stainless Steel by Utilizing Dry Blasting - 2^nd Report: Effect of Blasting Conditions on Wettability
K. Minaki, K. Kitajima, K. Minaki, M. Izawa and K. Tosha

Abrasive Characteristics on Mirror Finishing by Alumina Fiber Brush
K. Ishikawa, H. Suwabe and Y. Tutae

Electrochemical Magnetic Abrasive Compound Finishing
J.C. Fang, W.J. Xu, Z.Y. Zhao and H.Y. Li

Study on Internal Magnetic Field Assisted Finishing Process Using a Magnetic Machining Jig
Y. Zou and T. Shinmura

Development of Gas-Atomized Magnetic Tools
T. Saito, K. Koike, H. Yamato, A. Kuwana, A. Suzuki, H. Yamaguchi and T. Shinmura

Characterization of the Magnetic Abrasive Finishing Method and Its Application to Deburring
Y.M. Baron, S.-L. Ko and J.I. Park

Technique of Comparison and Optimization of Conditions for Magnetic Abrasive Finishing
Y.M. Baron, S.-L. Ko and J.I. Park

Finishing of Shape Surfaces by Magnetic Abrasive Polishing Method with Rotating Working Area
V.A. Litvinenko

Mechanics of the Micro Cutting by Abrasive Particle at Vibro-Abrasive Processing
A.P. Babichev

Quality of Deburring and Surface Finishing (DSF) in Russia
A.P. Babichev

The Optimization of Technological Processes of Detail Processing by Free Abrasives
M.A. Tamarkin
 

VI. Lapping and Polishing

Lapping Machining of High-Speed and High-Precision Ceramic Bearing Balls
Y.H. Wu, S.H. Li and K. Zhang

Time Series Analysis for the Mechanical Lapping of Single Crystal Diamond Cutting Tools
W.J. Zong, D. Li, H.X. Wang, T. Sun, K. Cheng and M.J. Chen

Effects of Particles Blend Ratio on Surface Quality in Surface Polishing Using Magnetic Polishing Liquid (MPL)
Y. Wu, K. Shimada, Y.C. Wong and M. Kato

Fundamental Verification of Ultraviolet-Excited Abrasion and Polishing Characteristics of Copper - Study of Luminescence Machining
Y. Chiwaya and T. Tanaka

Ultra-Precision Finishing of Micro Aspherical Surface by Ultrasonic Vibration Assisted Polishing
H. Suzuki, R. Kawamori, M. Miyabara, T. Okino, Y. Hijikata, Y. Yamamoto, K. Nakamoto, T. Moriwaki and H. Shibutani

Characteristics of High Rotational Speed Polishing with Oscillation Speed Control
K. Yoshitomi, A. Une and M. Mochida

Improvement of Machined Surface Flatness in Ultra-Precision Plane Honing
S. Suzuki, N. Yoshihara and T. Kuriyagawa

Polishing Characteristics of ELID-Ground Surface of Nano Precision Optical Elements
W. Lin, H. Ohmori, T. Suzuki, Y. Uehara and S. Morita

Precision Abrasive Jet Finishing of Cemented Carbide
T. Saito, S. Ito, Y. Mizukami and O. Horiuchi
 

VII. Wafer Processing and Nano Processing

Measurement of Surface Roughness and Thickness of Silicon Wafers Using an Infrared Laser
S. Koshimizu

Investigation of Chemical Mechanical Polishing of GaAs Wafer by the Effect of a Photocatalyst
S.H. Hong, H. Isii, M. Touge and J. Watanabe

Machining Mechanisms of Si Wafers in Mechanochemical Polishing by Soft Abrasives
N. Yasunaga

Friction Characteristic of Wafer Surface in Chemical Mechanical Polishing
Z.Y. Jia, J.X. Su, Z.J. Jin, D.M. Guo and L.P. Li

Corrosion Inhibiting Effect on Copper Chemical Mechanical Planarization (CMP) in Fe(NO₃)₃ Based Slurries
D.M. Guo, X.J. Li, Z.J. Jin and R.K. Kang

Nano Mechanical Processing of Silicon by Atomic Force Microscopy
S. Miyake, M. Wang and J. Kim

Application of Nanometer-Scale Processing Technique in High-Density Recording
M. Wang and S. Miyake

Optimization of the Chemical Vapor Deposition Induced Focused Ion Beam
H.-Z. Choi, E.-G. Kang, S.-W. Lee and W.-P. Hong

Thinning Technology of Patterned Silicon Wafer for Micro Pressure Sensor
T. Nagano, M. Touge and J. Watanabe

Study on the Surface and Subsurface Integrity of Ground Monocrystalline Silicon Wafers
R.K. Kang, Y.X. Zhang, D.M. Guo and Z.J. Jin
 

VIII. Cutting Performance and its Mechanism

MQL Cutting of Inconel 718 with a Super Lattice Coating Tool
T. Obikawa and Y. Kamata

High-Speed Milling Experiments on the Extended Length of Milling Tool
Z. Qin, C.Y. Wang, Y.N. Hu and Y.S. Lin

Study on Ultrasonic Vibration Drilling of Particulate Reinforced Aluminium Matrix Composites
C.S. Liu, B. Zhao, G.F. Gao and X.H. Zhang

Enhancing the AWJ Cutting Performance by Multipass Machining with Controlled Nozzle Oscillation
J. Wang and S. Xu

Mathematical Models for the Hydrodynamic Characteristics of Abrasive Waterjets
J. Wang and H. Liu

Prevention from Delamination of Composite Material during Drilling Using Ultrasonic Vibration
S. Aoki, S. Hirai and T. Nishimura

Influence of Material of Small Radius Ball End Mill on Cutting Accuracy in Deep Precision Machining
T. Akamatsu, K. Kitajima, S. Minamino and T. Kiriyama

Study on Surface Integrity of PTFE Finished by Ultra-Precision Cutting and Surface Performance
K. Okuda and M. Nunobiki
 

IX. Advanced Machine Tools, Cutting, and Abrasive Tools

Comparative Study on Machining the Internal Stationary Toroidal Gear
L. Yao, G.W. Wei, Z.H. Lan and J.S. Dai

Studies on NC Machining for Cylindrical Cams
W.Q. Gao, Q.S. Yan, J. Liang and Z.Y. Liu

Dynamic Analysis of a Biglide Parallel Grinder
P. Zou

A New Architecture of Tool Path Generation for Five-Axis Control Machining
K. Nakamoto, K. Shirase, A. Morishita, E. Arai and T. Moriwaki

Development of Orthogonal Impact Cutting Testing Machine
J. Shinozuka and T. Obikawa

Research of the Technological Parameters Influencing on the Surface Quality of Micro Complex Surface
M.J. Chen, Y.C. Liang, Y.Z. Sun, W.X. Guo and W.J. Zong

The Effect of Secondary Piezoelectric Effect on the Measuring Precision of Quartz Dynamometers
L.P. Shi, B.Y. Sun and M. Qian

Development of Shrinking Tool Holder Utilizing of Shape Memory Alloy
K. Kitajima, H. Sogabe and M. Hiromi

Microstructure of Ni-Al-Diamond Composite Fabricated by Self-Propagating High Temperature Synthesis
F.L. Zhang, H. Yuan, C.Y. Wang, K.X. Fu and Y.M. Zhou
 

X. EDM, ECM and USM

Electroforming of Copper/ZrB₂ Composite Coatings and Its Performance as Electro-Discharge Machining Electrodes
Z.J. Jin, M. Zhang, D.M. Guo and R.K. Kang

Performance of an Electrically Conductive CVD Diamond Electrode for EDM and FEM Analysis for a Very Low Wear
K. Suzuki, M. Iwai, A. Sharma, S. Ninomiya, T. Uematsu and S. Sano

A New Application of PCD as a Very Low Wear Electrode Material for EDM
K. Suzuki, A. Sharma, S. Sano, M. Iwai and T. Uematsu

A Study of Surface Integrity in WEDM-HS with Air Medium
Z.N. Guo, J.W. Liu and F.Z. Zeng

Calculating the Overcut in Electro-Discharge Machining
F.L. Zhao, H. Wang and Z.Z. Lu

Research on Highly Efficient EDM Pulse Power Supply and Its Experiments
Y.K. Wang, B.Y. Song and W.S. Zhao

The Research of Carbon Steel Surface Finished by Pulse Electrochemical Finishing Technology
H. Wang, J.J. Zhou and W.J. Xu

Study on the Machined Surface Topography and Performances on Electrochemical Finishing
H.Y. Li, X.M. Liu, H.J. Liu and J.C. Fang

Effect of Tool Segmentation in Ultrasonic Machining - Studies of Ultrasonic Die Sinking
O. Saito and T. Kuriyagawa
 

XI. Forming and the Related Novel Technologies

Study of Rapid Casting Process Based on SLS Prototypes
H.J. Liu, Y.M. Li, Y. Hao, X.P. Dong and N.Y. Huang

Study on the Dimensional Precision of the Polymer SLS Prototype
H.J. Liu, Y.M. Li, Y. Hao, N.Y. Huang and Y.S. Shi

Arc Spray Forming of Stainless Steel Mould
Z.Y. Zhao, J.C. Fang, H. Wang and H.Y. Li

FGM Mould with Fine Veins Rapidly Manufactured by Plasma Spraying
J.C. Fang, W.J. Xu, Z.Y. Zhao and L. Wang

Application of Neural Network in Plasma-Arc Flexible Forming
W.J. Xu, J.C. Fang, F. Liu, X.Y. Wang and Z.Y. Zhao

Numerical Simulation of the Cooling Process of Extruded Plastic Profiles within Vacuum Calibrators
D.Y. Zhao, M.J. Wang and M.C. Song

A Novel Automatic Feed-Rate Adjustment Method for Die-Cavity Roughing
M.J. Wang, Y.J. Cai and W.G. Yan

Deformation Analysis of Fixturing for Workpiece with Complex Geometry
Y. Wang, X. Chen and N. Gindy

Graph-Analytic Modification of the Method of Upper Estimation (Method of Energetic Geometry)
A.A. Alexandrov and V.V. Evstifeev

Features of Application of the Laser Method for Normalization of Accuracy of Resistors in Hybrid Integrated Circuits
Y. Antonov
 

XII. Inspection and Manufacturing Technologies

Fault Monitoring and Diagnosis of Ball Bearing Based on Hilbert-Huang Transformation
H. Li, H.Q. Zheng and L.W. Tang

Hilbert-Huang Transform and Its Application in Gear Faults Diagnosis
H. Li, H.Q. Zheng and L.W. Tang

An Optimal Matching Algorithm Based on Rough Localization and Exact Adjustment
Y.W. Sun and J.T. Xu

Study on Key Technologies of DNC System Oriented Networked Manufacturing
M.J. Wang, Y.J. Cai and W.G. Yan

Wavelet Transform Based 3D Scattered Data Processing in Binocular Micro Stereovision System
C. Liu, W. Pei, Z.Y. Xia, S. Niyokindi, J.C. Song and L.D. Wang

Number of visits:
28 May 2005