ISAAT 2002

The Fifth International Symposium on Advances in Abrasive Technology

15-17 November 2002, Hong Kong, China

http://ihome.ust.hk/~meygao/ISAAT2002/
 

List of Accepted Papers for Publication

I. Micro Machining: Machine Tools, Processes, and Characteristics

Development of a Multifunctional Micro-Machining System and its Applications
L. Zhou, Y. Yaguchi, T. Fujii, J. Shimizu and H. Eda

Fabrication of Electroplated Micro Grinding Wheels and Manufacturing of Microstructures with Ultrasonic Vibration
H. Onikura, R. Inoue, K. Okuno and O. Ohnishi

Experimental Investigation of Micro Scratching of Two-Phase Steel: Plastic Flow Mechanisms of the Ferrite and Cementite Phases
H. Taniyama, H. Eda, L. Zhou, J. Shimizu and J. Sato

A Study of the Fabrication of Multi-Layer Microstructures Using ELID Grinding and the Thick Photoresist Lithography Technology
J.W. Kim, Y. Yamagata, S. Morita, S. Moriyasu, H. Ohmori and T. Higuchi

An ELID Grinding System with a Minimum Quantity of Liquid
Y. Pan, T. Sasaki, N. Ito, H. Ohmori, Y. Yamagata, Y. Uehara and W. Lin

Micro-Hole Machining Using Ultrasonic Vibration
H. Z. Choi, S.W. Lee and B.G. Lee

A Study of Micro-Tool Machining Using Electrolytic In-Process Dressing and an Evaluation of its Characteristics
S.W. Lee, H.Z. Choi, H.W. Lee, J.Y. Choi and H.D. Jeong
 

II.    Grinding and Turning for Brittle Materials: Systems, Processes,
        Characteristics, and Applications

Development of a Novel Ductile-Machining System for Fabricating Axisymmetrical Aspherical Surfaces on Brittle Materials
J. Yan, J. Tamaki, K. Syoji and T. Kuriyagawa

Ultraprecision Fabrication of Glass Ceramic Aspherical Mirrors by ELID-Grinding with a Nano-Level Positioning Hydrostatic Drive System
T. Suzuki, H. Ohmori, Y. Dai, W. Lin, K. Katahira, A. Makinouchi, H. Tashiro,
H. Yokota, M. Suzuki, T. Abe and T. Shimasaki

Deterministic Manufacturing Processes for Precision Optical Surfaces
H. Pollicove and D. Golini

High-Precision Low-Damage Grinding of Polycrystalline SiC
L. Yin, E.Y.J. Vancoille, L.C. Lee, Y.C. Liu, H. Huang and K. Ramesh

Force Characteristics and Deformation Behaviors of Sintered SiC during an ELID Grinding Process
H. Ohmori, Y. Dai, W. Lin, T. Suzuki, K. Katahira, N. Itoh, A. Makinouchi
and H. Tashiro

High Efficiency ELID Grinding of Alumina Ceramics
F. Zhang, G. Kang, Z. Qiu, Y. Yang and X. Shi

Development of Grinding Technology for the Film of Diamond Coated Cutting Tool
Y. Murakami, M. Sakurai, S. Yui, H. Matuhashi, H. Liu and R. Kawai

Grinding Characteristics of Solid Immersion Mirrors with the ELID Grinding Method
Y. Uehara, H. Ohmori, Y. Yamagata, S. Moriyasu, T. Suzuki, K. Ueyanagi, Y. Adachi, T. Suzuki and K. Wakabayashi

A Basic Study of the Behavior of Slurry Action at Multi-Wire Saw
K. Ishikawa, H. Suwabe, S. Itoh and M. Uneda

A Fundamental Study of Dry Blasting: Effects of Abrasive Grains on Surface Roughness
K. Kitajima, T. Yamamoto and M. Izawa

Processes for the Generation of Glossiness on Ground Granites and Ceramics
X.P. Xu, H. Huang, Y. Gao and H.J. Xu

Force and Energy Characteristics in Grinding of Ceramics
J.Y. Shen, Y. Li, X.P. Xu and Y. Gao

A Study of the Process of Granite Belt Grinding
C. Wang, Z. Qin, X. Wei and Y. Wu

The Effects of the Jet Impact Angle on the Cutting Performance in AWJ Machining of Alumina Ceramics
J. Wang
 

III. Measurement and Surface Quality Assessment: Modeling, Process
       Characterization, and Novel Techniques

Nano-Topography Characterization of Axisymmetrical Aspherical Ground Surfaces
T. Kuriyagawa, N. Yoshihara, M. Saeki and K. Syoji

Three-Dimensional Shape Modeling of Diamond Abrasive Grains Measured by a Scanning Laser Microscope
T. Mahmoud, J. Tamaki and J. Yan

Improvement of Machined Surface Quality in Ultra-Precision Plane Honing
T. Kuriyagawa, K. Nishihara, S. Suzuki, Y. Guo and K. Syoji

Improvement in the Ground Surface Roughness of Fused Silica X-Ray Mirror with ELID-Grinding
W. Lin, H. Ohmori, Y. Yamagata and S. Moriyasu

A New Longitudinal Mode Ultrasonic Transducer with an Eccentric Horn for Micro Machining
A. Sharma, S. Mishiro, K. Suzuki, T. Imai, T. Uematsu and M. Iwai

Development of an On-Machine Observation and Profile Measurement System with an AFM and its Properties
Y. Watanabe, S. Moriyasu, K. Katahira, W. Lin, H. Ohmori, A. Makinouchi
and H. Tashiro

Experimental Investigation of the Characteristics of Laser Beam Passing through the Coolant Fluid of Various Concentrations for Surface Profile Measurement
Y. Gao, Z. Tao and S. Tse

Computational Investigation of Coolant Flow Patterns Using CFX
Y. Gao, S. Tse, W. Li, S. Chan and Z. Tao

B-Spline Based Wavefront Reconstruction for Lateral Shearing Interferometric Measurement of Engineering Surfaces
X. Liu and Y. Gao

Evaluation of Surfaces of Single SiC Crystal Polished with Various Kinds of Particles
J. Watanabe, M. Fujimoto, Y. Matsumoto, N. Kuroda and O. Eryu
 

IV. Cooling and Coolant: Modeling and Novel Techniques

Grinding Performance Improvement by a Special Coolant Superimposed with Megasonic Vibration
K. Suzuki, H.B. Qun, S. Mishiro, K. Tanaka, T. Imai, A. Sharma,
T. Uematsu and M. Iwai

Effects of Megasonic Coolant on Cylindrical Grinding Performance
H. Sakamoto, S. Shimizu, K. Suzuki, T. Uematsu and A. Shimotokube

Effects of the Supplied Cold-Air Condition on Grinding Temperature in Cold-Air Jet Grinding
S. Ohmori, M. Tateno and K. Kokubo

An Improved Technique to Determine Coolant Flow Patterns for In-Process Measurement
S. Tse, Y. Gao, Y. Kuen and Z. Tao

Behavior of the Coolant in Grinding with a Floating Nozzle
S. Ninomiya, S. Tooe, K. Suzuki and T. Uematsu
 

V. Polishing: Novel Techniques, Tooling, Characteristics, Modeling, and
      Applications

Application of an Oscillating Spindle to Machining Processes
H.S. Lee, S. Sasaki, T. Yamada, K. Mizukawa and Y. Ono

Ultra Precision Polishing with Oscillation Speed Control: an Analysis of the Pressure Distribution and Profile
K. Yoshitomi, A. Une and M. Mochida

Physical and Chemical Characteristics of the Ceramic Conditioner in Chemical Mechanical Planarization
J.Y. Park, D.H. Eom, S.H. Lee, B.Y. Myung, S.I. Lee and J.G. Park

Kinematic Analysis of Chemical Mechanical Polishing and its Effect on Polishing Results
H. Kim, H. Kim, H. Jeong, S. Lee and D. Dornfeld

Material Removal Mechanism in Dynamic Friction Polishing of Diamond
K. Suzuki, M. Iwai, T. Uematsu and N. Yasunaga

An Analysis of the Pad Deformation for Improved Planarization
T.L. Horng

A Study of Nano-Polishing of Injection Molds Using a Fixed Abrasive Pad
J. Choi, H. Kim, J. Park, H. Jeong and H. Seo

Development of New Mica Abrasives Suitable for High Performance Mechanochemical Polishing of Si Wafers
N. Yasunaga and S. Okada

Development of a Polishing Disc Containing Granulated Fine Abrasives
H. Nakamura, J. Yan, K. Syoji and Y. Wakamatsu

Autonomous Tool Path Generation in Robotic Polishing of an Aluminum Alloy
A.A. Akbari and S. Higuchi
 

VI. Grinding Wheels: Characteristics and Novel Designs

Development of an Ultra-High Speed Cutting Wheel
S. Yamazaki, K. Syoji, T. Kuriyagawa, Y. Ogura, T. Fukunishi and M. Miyake

Development of Grinding Wheels by Stereolithography and Investigation of their Characteristics
T. Tanaka and K. Okushima

The Effects of Hard Lubricant Coatings on the Performance of Electro-Plated Superabrasive Grinding Wheels
S.C. Salmon

Effectiveness of Laser Cleaning for Grinding Wheel Loading
X. Chen and Z. Feng

The Effect of Porosity on the Grinding Performance of Vitrified CBN Wheels
R. Cai, W.B. Rowe and M.N. Morgan

Measurement of Vitrified CBN Grinding Wheel Topography
R. Cai, W.B. Rowe, M.N. Morgan and B. Mills

Friction and Wear Properties of an ELID-Grinding Wheel based on CCD Microscope Observation
T. Kato, H. Ohmori, K. Katahira, N. Itoh, N. Mituishi and A. Nemoto
 

VII. Advances in Truing and Dressing for Grinding

ELID Grinding with a Tape Type Electrode
N. Itoh, H. Ohmori, N. Mituishi, W. Lin and A. Nemoto

A Study of the Machining Accuracy of the Round-Off Truing Method: Effects of the Set-Up Angle for the Brake Truer
S. Okuyama, K. Yamashita, T. Kitajima, A. Yui and S. Hanasaki

Electrocontact Discharge Dressing of a Resin-Bonded CBN Grinding Wheel and its Grinding Performance
J. Tamaki, A. Kubo, J. Yan and K. Narita

Process Characterisation of Grinding AISI 52100 with Vitrified CBN
S. Ebbrell, W.B. Rowe and M.N. Morgan
 

VIII. Novel Abrasive Techniques: Processes and Applications

Finishing of Tiny Nozzles by a Gyration Flow Finishing Method
H. Sugimori, T. Kurobe and Y. Yamada

High Speed Slurry Flow Finishing of the Inner Wall of a Stainless Steel Pipe
T. Kurobe, Y. Yamada and H. Sugimori

Development of an Ultrasonic Torsional Vibration Tool Utilizing the 3rd Order Wave Mode
S. Mishiro, H.B. Qun, T. Imai, A. Sharma, K. Suzuki, T. Uematsu and M. Iwai

A New Centerless Grinding Technique without Employing a Regulating Wheel
Y. Wu, Y. Fan, M. Kato, J. Wang, K. Syoji and T. Kuriyagawa
 

IX. Mechanics and Control of Grinding Processes

Deformation Patterns of a Micropositioning Table under a Moving Force
Y. Gao, S. Tse, S. Ko and W. Chan

A Study of the Form Error Compensation for Aspherical Lens Machining
P.L. Tso and H.C. Chuang

A Self-Tuning Based Fuzzy-PID Approach for Grinding Process Control
Z. Yang, Y. Gao, D. Zhang and T. Huang
 

X. Novel Machining Techniques: Machine Tools and Applications

Development of a Micro Machining Technology for Fabrication of Micro Parts
T. Je, J. Lee, D. Choi, E. Lee and B. Shin

Development of a Desktop Micro Injection Molding Machine
M. Asami, K. Yoshikawa, Y. Ohi, H. Ohmori, Y. Yamagata, Y. Uehara, W. Lin,
T. Sasaki and Y. Pan

Diamond Turning of Single Crystal Germanium with an Oscillating Rotary Tool
O. Horiuchi, R. Itabashi, Y. Mitoma, H. Shibutani and H. Suzuki

Rapid Manufacturing of 3D Shaped Products by Multi-Face High-Speed Machining
B.S. Shin, D.Y. Yang, D.S. Choi, E.S. Lee, T.J. Je and K.H. Whang

Selective Removal of Carious Dentine with the Micro Abrasive Jet Technology
T. Kuriyagawa, O. Kinbara, S. Horiguchi, J. Tagami, T. Yamada and K. Syoji

The Anchoring Force in the Electrodeposition Type Diamond Abrasive Wire Sawing
H. Ohne, K. Kono and K. Uno

Number of visits: 
30 November 2002